How To Remove A Watch Back

Download Article

Download Article

When you don't have the specialized tools to remove a scout bankroll, you may not know how to replace a battery or fix a cleaved watch. Simply you don't need to buy expensive tools to pry off your watch's backing. In many cases, specific household items will do. Depending on your watch, you may be able to pry off the backing with something as elementary as your thumbnail, a razor blade, a rubber ball, or a pair of scissors.

1. 1

   Try your thumbnail on cheap, simplistically-designed watches. Some watch backings can be opened by prying a simple swivel in the dorsum open up. Inspect your watch to make up one's mind whether the backing will make this possible. If the backing has no screws, it can likely be opened with your thumbnail.^[i]

   • This method will only work if your scout backing has no screws.
   • While you may be able to use other fingernails, your thumbnail is commonly the largest and strongest.

2. 2

   Locate your watch's hinge. On unproblematic watches, the hinge will look like a small indentation along the edge of the sentry's back. This is where you will place your thumbnail to pry off the backing.

   • Do non set your watch downward every bit you lot work. Keep it in your other hand and then you lot can maneuver it while prying it open.

   Advertisement

3. three

   Insert your thumbnail underneath the backing hinge and lift. Equally y'all work, your smash should face the dorsum of the sentry. Lift slowly to avert chipping or angle your thumbnail. With force per unit area and patience, the backing should pop off. If the backing does not easily come off, avoid using your thumbnail so you don't damage it.^[two]

   • This method is best done if yous have long, healthy fingernails.

4. 4

   Utilise a razor blade as an culling. If the hinge is tight or your thumbnail is too brusque to pry off the backing, a apartment razor blade tin can piece of work every bit well. Identify the razor blade's border in through the swivel opening and lift until it is pried off.^[three]

   • If there is no indentation merely a space betwixt the back and casing, y'all can use this method with a razor blade.
   • Small kitchen knives tin can work in a pinch if you don't have a razor blade.

   Advertisement

1. 1

   Buy a soft, mashable safe ball. Prophylactic balls often have enough grip to pry off watch backings. Choose a rubberized ball that is both squishy and tacky and so information technology can latch onto your watch'southward back.^[4]

   • Stress balls tin work every bit a cheaper alternative.
   • Avoid safety balls made from hard materials. The ball needs to be soft and pliable and so it can grip the backing.
   • A super-cheap culling is to opposite-wrap a new lawn tennis ball with duct tape until completely covered. The duct tape agglutinative is very viscous and the tennis ball gives y'all something to grip onto.

2. two

   Place the watch down on a flat surface. Although yous can concur the lookout in your hand while you piece of work, placing it on a apartment surface will allow you to piece of work more comfortably and efficiently. If your lookout is expensive or fragile, set up a towel downward for the sentinel to rest on while you piece of work.

3. three

   Printing the ball firmly into the watch's backing. The safety brawl will need to press itself firmly against the backing, particularly the spiral notches. Apply firm pressure every bit you movement the ball against the backing so the ball can establish a stiff grip.^[5]

   • Utilise pressure to the lookout man in increments to avert accidentally damaging your sentinel.

4. 4

   Twist the brawl counterclockwise. About spotter models will loosen when turned counterclockwise and tighten when turned in the opposite management. As y'all plough the watch, the backing's screws should loosen. Twist quickly and firmly to keep the safe ball'southward grip firm on the backing.^[6]

5. five

   Use the ball to loosen, merely not remove, the backing. One time the backing is loose enough, yous can use your fingers to remove information technology entirely. Twist the backing with your fingers in the same counterclockwise movement until it and the screws come off. Keep the backing and screws in a safe place so you do not lose them.^[seven]

6. 6

   Utilize the rubber ball again to put the backing on afterward. You lot'll want to make certain to secure the backing on tightly once you have done any you lot needed to while removing it. Place the comprehend on your lookout man's back and press the rubber brawl firmly confronting it. Plow swiftly in a clockwise motion to tighten the backing up again.^[8]

   Advertisement

1. i

   Use scissors to loosen extremely tight backings. Rubber balls may not provide enough grip if your backing is screwed on tightly enough. Scissor tips are usually small enough to reach your lookout's screws and twist them off equally a specialized screwdriver would.

   • Choose a pair of scissors with blunt tips to avoid injuring yourself if they skid.

2. ii

   Put the spotter down on a house, flat surface. Placing the watch on a flat surface will allow you lot to piece of work safely while treatment the scissors. If your lookout man is expensive or fragile, set a soft towel downwards for the watch to rest on while you take out the screws.

3. iii

   Locate the spotter'south screw notches. These notches mark the locations of your screws. Open the handle of the scissors, then put one scissor tip into a spiral notch as you lot prepare to unscrew it. Brand sure you place the scissor finish firmly inside the notch to avert losing your grip as you lot turn it.^[9]

4. 4

   Twist the notches in a counterclockwise movement. Just as you would with the rubber ball method, turn the scissors in a counterclockwise motility to loosen each screw. Once you lot've removed your first screw, echo this method on the remaining notches.^[x]

   • When you're set up to put the backing on again, you will utilize the same method only twist in a clockwise movement.

5. five

   Endeavor using a precision screwdriver equally an alternative. If you lot can't get the hang of or would prefer non to utilize scissors, purchase a precision screwdriver from your local hardware store. Precision screwdrivers are usually pocket-sized enough to unscrew lookout backings without having to purchase specialized tools.

   Advertizing

Add New Question

• Question

  How practise I replace the bankroll cover of my watch? I pried information technology off with a sparse bladed knife but it won't pop dorsum together hands.

  

  Try laying it upside down on a tabular array and pushing downwardly on the back evenly with a piece of wood.

• Question

  How do I remove the dorsum if there is no tab?

  

  Some watches have spiral-on case backs, which tin can ordinarily exist identified by notches cut into the case back or a coin-like edge. In this case, the proper tools are needed.

• Question

  How do I open the back of a watch that has been smashed in too far?

  

  In cases where the watch is damaged, you may need professional help to prepare it. Contact a local jeweler or picket repair service to assess what needs to be done.

• Question

  What do I do if I do non have that type of watch?

  

  You demand a watch opener tool set. Yous tin buy a mediocre set on eBay for about $12, just it will work fine.

• Question

  What do I exercise if I can't find any notches or indentations on the back of my watch to go the back off?

  

  In that case, I would recommend taking your scout to a jeweler or other specialist then you don't accidentally damage it.

• Question

  How to replace back cover?

  

  If the dorsum cover is damaged, replacement options will vary depending on your lookout man model. Contact a local jeweler or watch repair service to appraise your options.

• Question

  Should I stop my lookout when I'm not using it?

  

  I've stopped mine for a long time, and the initial battery still worked fine later on a couple of years of inactivity. So I'd wager it preserves battery life by stopping information technology when yous aren't using information technology, every bit I haven't changed the battery yet in mine.

• Question

  How do I become the back off my Luv and Kush watch?

  

  If there aren't any dents or notches on the watch and you deceit employ any of the tips above, then you would need the proper tools.

• Question

  I have a Ninja Turtle scout from 2014, and I can't come across any notches or anything that would assist me pry it off. Does this picket need proper tools?

  

  Information technology is likely a pressure level fit back. If then, this will require some sort of instance back opening tool. Also, you could try to use methods described in this page.

Ask a Question

200 characters left

Include your email address to get a bulletin when this question is answered.

Submit

Advertisement

• Be careful when handling sharp knives or screwdrivers to avoid hurting yourself.

• If you've tried each method and you still can't become the backing open, visit a local jeweler to decide what your all-time option is.

Thanks for submitting a tip for review!

Advertisement

Things You'll Need

• Blunt pair of scissors
• Rubberized ball
• Duct tape and tennis ball
• Razor bract (optional)
• Precision screwdriver (optional)
• Towel (optional)

Nigh This Article

Article Summary 10

If yous need to pry off a watch backing but don't take the proper tools, start by turning your watch over and locating the small indentation along the edge, which is the hinge. Side by side, insert the edge of a razor blade or kitchen knife into the hinge opening, working slowly so you don't harm the watch. Then, lift the razor bract like a lever and utilise even pressure to pry off the backing. For tips on how to pry off a specially tight sentinel bankroll using a scissors, read on!

Did this summary aid you?

Thank you to all authors for creating a folio that has been read 1,641,626 times.

Did this article help you?

Source: https://www.wikihow.com/Pry-off-a-Watch-Backing-Without-Proper-Tools

Posted by: wittgation.blogspot.com

Share this post